A line by EASEN Commercial Furniture · Foshan, ChinaWhatsApp +86 150 1164 1080
Request a quote
Irving 45° Corner Seat
Corners, ADA Ends & Specialty Seating

Irving 45° Corner Seat

An L-shaped banquette with a dedicated 45-degree corner seat that turns a dead corner into a sellable place.

Ref. BAN-021

Specifications

Standard size
59 in × 59 in legs × 43 in H back (150 × 150 × 110 cm)
Corner seat
23.5 in (60 cm) wide, 45° angled back
Corner table
Triangular, 21.5 in (55 cm) sides, single pedestal
Seat height
18 in (46 cm)
Upholstery
Commercial fabric or vinyl; COM/COL accepted
Sections
2 straights + corner unit
Customization
Leg lengths, back style, table top

Best for

  • L-shaped banquette runs
  • Maximizing covers
  • Bistros and brasseries
Request a quote

Where two banquette runs meet in an inside corner, there is usually a dead zone where the knees of two guests would collide, so nobody sits there. The Irving fills that corner with a proper seat.

The corner is cut at 45 degrees and filled with its own 23.5 in (60 cm) wide seat and angled back, upholstered as a single panel so it clearly reads as a deliberate seat. A small triangular table, 21.5 in (55 cm) per side on a matte black single pedestal, serves that seat. Each leg of the L is 59 in (150 cm) long, with a 43 in (110 cm) vertical channel back.

The arithmetic. A typical mid-sized dining room has several inside corners. One recovered seat per corner, sold every service, adds up fast over a year.

Construction. Two straight sections and a corner unit, bolted together; welt runs continuously along the L and the angle.

Options. Leg lengths, back style and height, corner table top, upholstery.

Request a quoteWhatsApp